Navman ICN 550 - Manual (Page 46)

46
iCN 550 | User Manual
Alerts Preferences — Active POIs
The Active POI settings allow you to set warning chimes and visual warnings for custom POIs that
will activate within a chosen radius of your location. For example, a warning chime will sound or a
visual warning will display when an active POI is within 150 ft of, but not necessarily on, your route.
Note: Custom POIs must first be installed on your iCN using Smart Desktop
 
before they can be
set as active POIs. See Points of Interest (POI) Editor on pages Points of Interest (POI) Editor Points of Interest (POI) Editor 61-63.
1. From the Preferences menu, tap Safety Alerts.
The Safety Alerts screen will display.
2. On the Safety Alerts screen, tap Active POI.
The Select Active POI screen will display. Active POI Active POI
3. Select a custom POI type.
The POI Activation Settings screen will display.
4. Select the Active check box to activate the POI.
5. Modify the settings as required:
• To enable a warning chime when the POI is in close proximity, select the Audio Warning
check box.
• To enable a visual warning when the POI is in close proximity, select the Visual Warning
check box.
• Move the Distance to POI slider to select the distance at which the warnings will activate.
6. Tap Save.
The Main Menu screen will display.