Navman ICN 550 - Manual (Page 14)

14
iCN 550 | User Manual
G
et
tin
g
st
ar
te
d
To Turn your iCN Off
When your iCN is off, it enters a suspended state and the system stops operating. When you turn
your iCN on, it returns to the screen you were last viewing.
1. Remove the iCN from the suction-mount bracket if necessary, then gently push the GPS
receiver back towards the iCN.
The receiver will click into place.
2. Press .
The iCN will enter a suspended state and the screen will turn off.
Power-Saving Suspended State
To save battery power, your iCN will automatically enter a suspended state after a set period of
time. You can change the default suspended-state settings at the Power Options screen.
Main Menu  Preferences  More Preferences  Hardware  Power Options
Note: if you are not going to be using the iCN for an extended period of time, switch the
Battery Switch to OFF to save battery power.
To Reset your iCN
Normally you do not need to reset your iCN; however, should your iCN not turn on or not respond,
you can reset it to solve the problem.
To reset your iCN, either:
a. Press and hold .
The message Reset Device? will display. Tap Yes.
b. Use the stylus to press the Reset button on the top of the iCN.