Sx 35 dsc – NASA SX 35 DSC User Manual

Page 33

SX 35 DSC

•

Use the

SELECT

knob to position the cursor on the

TIME SET

topic.

•

Press the

ENT

key. The

TIME FORMAT

menu appears in the display.

INT

TIME FORMAT
>12 HR.
24 HR.
88:88 +

Format Selection

•

Use the

SELECT

knob to select the desired format, either

12 HR

•

Press the

ENT

key. The

TIME OFFSET

menu appears in the display.

INT

TIME OFFSET
>+00.0

88:88

Time Offset Selection

•

Use the

SELECT

knob to set the time difference from the Prime Merid-

ian to your location. If you are West of the Prime Meridian, select a
negative (—) value. If you are East of the Prime Meridian, select a posi-
tive (+) value. Time offset values from 0 to 12 hours plus or minus may
be entered in 1/2 hour increments. Obtain the time offset value from
your GPS navigator.

•

When your selection is complete, press the

ENT

key to store the set-

ting and exit the menu.

NMEA SET

Allows NMEA sentences from navigation equipment manufactured to ear-
lier versions of the NMEA standard to provide Lat/Lon position coordi-
nates and UTC time.

•

Press the

MENU

key. Menu topics appear in the display.

•

Use the

SELECT

knob to position the cursor on the

NMEA SET

topic.

•

Press the

ENT

key. The

NMEA CHECKSUM

menu appears in the

display.