National Instruments Relay Module SCC-RLY01 - Manual (Page 5)

© National Instruments Corporation 5 SCC-RLY01 Relay Module User Guide
Caution The SCC-RLY01 module is derated to 30 V maximum switching voltage in the
SC-2345 carrier regardless of any other voltage markings found on the SCC-RLY01
module case.
Signal bandwidth.................................... DC to 400 Hz
Contact resistance .................................. 30 m
Ω max
Switching time
Operate time (NC to NO)................ 5 ms (10 ms max)
Release time (NO to NC)................ 4 ms (5 ms max) 1
Maximum operating speed..................... 30 cps at rated load
Contact lifetime...................................... 5
× 10 7 operations at 180 cpm
(minimum)
Power Requirement
Digital power.......................................... 300 mW max
+5 V........................................................ 60 mA max
Physical
Figure 3. SCC - RLY01 Dimensions
Weight .................................................... 37 g (1.3 oz)
1 Excluding contact bounce time
1.87 cm
(0.74 in.)
7.93 cm
(3.12 in.)
3.55 cm
(1.4 in.)