Nokia 1108 - Manual (Page 14)

C a l l f u n c t i o n s
Copyright © 2004 Nokia. All rights reserved. 7
After the phone number has been
assigned to a number key, you can
speed dial the number in the
following ways:
• Press the corresponding number
key and then press Call , or
• If Speed dialling is set to "on",
press and hold the corresponding
number key until the call is
started (see
”Call settings” on
page 21 ).
■ Answering a call
In standby mode, press
Answer . To divert or reject the call
without answering, press .
■ In-call operations
During a call, press and
Options for some of the following
functions. Many of these are
Network Services.
Mute or Unmute ,
Hold or Unhold , New call , Answer ,
Reject , End call , End all calls ,
Contacts , Send DTMF , Swap , Menu
and Flashlight on or Flashlight off .
■ Listening to voice
messages
Voice mailbox is a Network Service.
For more information and to receive
your voice mailbox number, contact
your service provider. To call your
voice mailbox, press and hold
in standby mode. To change the
voice mailbox number, see ”Voice
mailbox number” on page 16 .
To divert calls to your voice mailbox,
refer to
”Call settings” on page 21 .
■ Locking the keypad
The keypad lock prevents keys from
being pressed accidentally.
To lock or unlock the keypad: In
standby mode, press
Menu
and then quickly.
You can also set the phone to
automatically turn on the keylock
after a certain period of time. Refer
to
”Keyguard settings” on page 23 .
When the keypad is locked, the
indicator
is shown on the
display.
Note: When keypad is
locked, calls may be possible
to the emergency number
programmed into your
phone (e.g. 112 or other
official emergency number).
Key in the emergency
number and press
Call .
The number is displayed only
after you have keyed in its
last digit.