NEC PV32 - Manual (Page 42)

English-38
Basic Operation
- continued
LOCK
Lock System
Set Password
Rating
Input Block
OK MENU
LOCK
Lock System
Set Password
Rating
Input Block
OK MENU
Enter Password
LOCK
Lock System
Set Password
Rating
Input Block
OK MENU
New :
Confirm :
Lock System
Press the MENU button and then use D / E button to select the
LOCK menu. Then, press the G button.
If Lock is already set, enter the password.
The initial password is “0-0-0-0”.
Enables or disables the blocking scheme you set up previously.
Press the D / E button to select Lock System.
Press the G button and then use D / E button to select On or Off.
Setting Lock on/off
Change the password by inputting a new password twice.
Press the D / E button to select Set Password.
Press the G button.
Enter a four digit password.
As soon as the 4 digits are entered, re-enter the same 4 digits in the
New, and Confirm areas.
Press the OK button to save.
If an invalid password is input in Confirm Password screen,
“Password Mismatch” appears on screen.
The changed password is stored.
Set password