Nokia 2110 User Manual

Page 27

Getting Started

phone’s memory functions. Keep it, therefore, secret and in a
safe place, separate from the phone.

If you key in an incorrect security code (CODE ERROR) five
times in succession, the phone will not accept new tries for
the next five minutes.

The security code can be changed within Menu 5 6 1.

PIN CODE (4 to 8 digits)

The PIN (Personal Identity Number) code is supplied with the

SIM card.

When the PIN code request is enabled within Menu 51 (PIN

Code Request), the code is required each time the phone is

switched on,

If you enter a wrong PIN code three times in succession, the
PIN code is disabled and cannot be used any more.

When you see the prompt Enter PUK code, key in the PUK

code (see below) and press the

selection key. Next, enter

a new PIN code at the prompt Enter new PIN: and press the

selection key. Finally, enter the new code again at the

prompt Verify new code: and press the

selection key.

The PIN code can be changed within Menu 562. The PIN

code request must be turned on to change the code.

PIN2 CODE (4 to 8 digits)

The PIN2 code is supplied with some SIM cards.

The PIN2 code is required to access some functions, such as

charging unit counters, which must be supported by the SIM
card.

If you enter a wrong PIN2 code three times in succession,
the PIN2 code is disabled and cannot be used any more. To

change the code, follow the same procedure as for the PIN

code.

The PIN2 can be changed within Menu 5 6 3.