Nortel Networks Nortel IP Phone 1110 - Manual (Page 90)

Additional phone features
90
Note: If you do not use the Resume Normal Mode command after
testing, the telephone automatically returns to Normal Mode in 10
minutes.
Troubleshooting MG 1000B
The MG 1000B can display error messages on-screen. Table 5 lists error
messages and describes actions to correct the causes.
1. Press the Services key.
2. Press the Up/Down navigation key to
scroll and highlight Resume Normal
Mode .
3. Press the Enter key (the telephone
registers back to the main office).
Table 5: Troubleshooting MG 1000B (Part 1 of 2)
Display Message Probable Cause Actions
Local Mode Test Local Mode.
Network problem.
Press the Services
key, and then select
Resume Normal
Mode.
Contact system
administrator if
problem persists.
Local Mode
Invalid ID (1)
Gatekeeper unable to
find end point from
Branch User ID. Notify system
administrator.
(Services)