Adsl2+ router, Mac set-up (cont), Mac user guide – NetComm NB6Plus4 User Manual

Page 5

Text mode
Original mode

ADSL2+ Router

Mac User Guide

NB6Plus4 -

(“Configure iPV4” if you’re using Mac OS 10.3) and select “Using DHCP”. Click on
Apply Now to save the changes.

Your dialog box should now look like this:

If your Mac does not accept an IP address from the DHCP server in your NB6Plus4
and the IP address field remains blank, try selecting “Using DHCP with manual
address” from the “Configure” pop-up menu (“Configure iPV4” if you’re using Mac
OS 10.3) and entering 192.168.1.3 in the “IP address” field.

Mac

Set-up

(cont)