Ml o n p, Rn l, Find your projector from the models listed below – NEC NP40CM User Manual
Page 7
ISSUED: 11-01-06 SHEET #: 055-9478-6 01-14-09
Visit the Peerless Web Site at www.peerlessmounts.com
7 of 8
For customer care call 1-800-729-0307 or 708-865-8870.
M
L
O
N
P
*
R
N
L
*
*Notch indicates front of projector.
Flip projector upside down and fasten three M3 x 25 mm socket pin screws (N) and three .198 x .313 x .688
retaining spacers (R) into the threaded inserts as indicated below. Finish tightening M3 x 25 mm socket pin
screws (N) using 2 mm security allen wrench (Q).
*
B. NEC NP100/200
*
A. NEC NP40/41/50/60/61/62
*Notch indicates front of projector.
Flip projector upside down and remove feet from bottom of projector. Fasten two M3 x 25 mm socket pin
screws (N) and two .198 x .750 retaining spacers (P) into the threaded inserts as indicated below. Fasten one
M3 x 16 mm socket pin screw (M) and one .156 x .375 retaining spacer (O) into the threaded insert as indi-
cated below. Finish tightening screws (N, M) using 2 mm security allen wrench (Q).
Find your projector from the models listed below
3-1