NEC NP40CM - Manual

ISSUED: 11-01-06 SHEET #: 055-9478-6 01-14-09
Visit the Peerless Web Site at www.peerlessmounts.com
1 of 8
For customer care call 1-800-729-0307 or 708-865-8870.
Read instruction sheet before you start installation and assembly.
Maximum Load Capacity: 50 lb (22.7 kg)
IMPORTANT! Be sure not to touch the projector while tightening the set screw on the
ball and socket mount. This may cause the image to be unaligned when you let go.
Applications:
Flush Mount .................................................................................................................................................. page 5
Extension Column ........................................................................................................................................ page 6
Installations:
To Wood Joist Finished Ceilings,
Exposed Wood Joists, or Wood Beam Ceilings ........................................................................................ page 3
To Concrete Ceilings .................................................................................................................................... page 4
IMPORTANT! Turn to the appropriate page for your ceiling installation.
• Make sure that the supporting surface will safely support the combined load of the equipment and all attached hardware and
components.
WARNING
R
This product is intended for use with UL
Listed products and must be installed by a
qualified professional installer.
NEC DISPLAY SOLUTIONS OF AMERICA, INC.
Model: NP40CM
Installation and Assembly -Ceiling Mount for
NEC NP 40/41/50/60/61/62/100/200 Projectors