Identification of controls, Front panel – NAD C715 User Manual

Page 7

1 POWER: Press this button to switch oN the C 715. The Standby lED

indicator will turn from amber to blue and illuminate the Vacuum
Fluorescent Display (VFD). Pressing the power button again turns the
unit back to standby mode.

If the disc tray is open and the C 715 is powered oFF, the disc tray will

draw close and the unit powered oFF.

2 INDICATOR: This indicator will light up amber when the C 715 is

in standby state. When the C 715 is at oN state, this indicator will
illuminate blue.

3 DISC TRAY: With the DISC TRAy open, insert a compatible media disc

face down onto the tray.

“No Disc” appears on the C 715’s VFD if the disc is placed upside down.

4 SOURCE: Toggle this button to select through the following sources:

FM / AM CD USb

MP AUX VIDEo TAPE

5 RECORD: Use this button to start recording to a USb device.

6 BAND / (PLAY) [ ]: In CD or USb mode, press this button to start

playback. If the disc tray is open, press this button to automatically
close the tray and start playback if a disc is loaded.

In AM/FM mode, toggle this button to select AM or FM mode.

7 FM MODE/ (PAUSE) [ ] : In FM mode, this button will toggle between

FM Stereo and FM Mono. The front panel [FM MoDE] key is a dual-
purpose control. In the normal position, (“STEREo” and “TUNED” icons
are illuminated in the VFD) only the stations with a strong signal can be
listened to and the noise between stations is muted.

Pressing the [FM MoDE] button again (“STEREo” icon is extinguished;

only “TUNED” is illuminated) allows distant and potentially noisy stations
to be received. Noise is reduced if the FM station signal level is less than
the FM stereo threshold (since mono FM is inherently less noise-prone)
though at the sacrifice of stereo effect.

In CD or USb mode, press this button to toggle between Pause and Play

of a compatible media disc.

8 RDS MODE/ (STOP) [ ]: When tuned to a RDS station, toggle this

button to cycle through the following RDS modes:

PRoGRAM SERVICE

RDS CloCk TIME

RDS PRoGRAM TyPE

RDS RADIo TEXT

TRAFFIC ANNoUNCE

Refer to the section “RDS MoDE oPTIoNS” for a description of the above

modes.

In CD or USb mode, press this button to stop playback and re-set the

pickup to the beginning of the disc. The display reverts to showing the
total number of tracks and total playing time of an audio disc or total
number of WMA/MP3/Audio files. If the C 715 was programmed to play
a selection of tracks, the program will be retained in the memory.

IDENTIFICATION OF CONTROLS

FRONT PANEL

ANÇ

AIS

ESP

AÑOL

ALIANO

DEUT

SCH

NEDERL

ANDS

SVENSK

РУ

ССКИЙ