Insert dialling codes, Setup voice mail with dialling codes – Nokia 3125 User Manual

Page 36

M e s s a g e s ( M e n u 1 )

Be precise; you will need this
information in

Insert dialling codes

Press the * key repeatedly to cycle
through dialling codes. Once the
desired code appears in the display,
pause briefly and the code is inserted
into the dialling string.

The following dialling codes are
available:

*—Bypasses a set of instructions.

+—International dialling access.

p—Pauses for 2.5 seconds before
sending any numbers that follow.

w—Waits for you to press the Talk
key before sending the numbers or
codes that follow.

Setup voice mail with dialling
codes

1. At the standby mode, select

Contacts

Speed dials

2. Scroll to an empty speed dialling

slot and press

Assign

3. Enter your voice mailbox number,

including the area code.

4. Refer to dialling codes and enter

any codes as necessary using the
information that you wrote down
from

Write down voice mailbox

number and process, 25

For example, if you pause for 5
seconds after connecting to voice
mail, enter p twice after the voice
mailbox number, for example,
2145551212pp.

5. Enter any remaining pauses or

other information that allows
you to listen to your messages,
and press

6. Enter a name (such as Voice

Mail), and press

To dial and listen to your voice mail,
press and hold the assigned speed
dialling key at the standby mode.

Note: If Speed dialling is off,
the phone displays a prompt
asking if you would like to
turn on speed dialling.