Nortel WLAN IP 2210 - Manual (Page 41)

41
WLAN IP Handset 2210/2211/2212 User Guide
Chapter 5
Troubleshooting
This section describes the options to view specific information about your WLAN Handset and
error messages displayed by your WLAN Handset. This information is useful in troubleshooting
numerous problems.
This section contains information about:
• “View system information” on page 41
• “View the current call server IP address” on page 42
• “View terminal type” on page 43
• “View extension” on page 43
• “Display messages” on page 44
View system information
The System Info option enables the user to view information about the system. It displays:
• handset IP address
• server IP address
• handset firmware version
To view the handset IP address
1 Press when the handset is in the standby state.
2 Press the Up and Down buttons to scroll through the menu and highlight System Info .
3 Press the Select button (or OK) to select System Info .
4 Press the Up and Down buttons to scroll through the menu and highlight Phone IP Addr .
5 Press the Select button (or OK) to select Phone IP Addr .
6 Do one of the following:
• Press UP to return to the previous menu and configure another option.
• Press to exit all menus and return to the standby state.
You can also press Exit from the top-level menu to exit the menu and return to the active
(off-hook) state.