Nortel WLAN IP 2210 - Manual (Page 27)

Chapter 2 WLAN Handsets overview 27
WLAN IP Handset 2210/2211/2212 User Guide
Adjust ringer volume
You have two ways to adjust the ringer volume:
• Press the Up or Down button while the handset is ringing.
• configure the volume using the FCN button when in standby state. See “To select the Ring
Volume” on page 22 for further information.
Adjust speaker volume
You can increase or decrease the speaker volume of the WLAN Handset 2211 only.
You have two ways to adjust the ringer volume:
• Press the Up or Down button while on a call.
• Configure the volume using the FCN button when in standby state.
To adjust speaker volume using the Function menu
1 Press when the handset is in the standby state.
2 Press the Up and Down buttons to scroll through the menu and highlight Push-to-Talk .
3 Press the Select button (or OK) to select Push-to-Talk .
4 Press the Up and Down buttons to scroll through the menu and highlight Audio Volume .
5 Press the Select button (or OK) to select Audio Volume .
6 Press the Up and Down buttons to adjust the volume to a suitable level.
7 Press the Select button (or OK) to select the setting.
8 Do one of the following:
• Press UP to return to the previous menu and configure another option.
• Press to exit all menus and return to the standby state.
You can also press Exit from the top-level menu to exit the menu and return to the active
(off-hook) state.
Silence the ringer
You can silence (or mute) the WLAN Handset ringer.
You silence the ringer in one of two ways:
• To silence the ringer, press while the handset is ringing.
• Use the FCN menu in standby mode