Nortel WLAN IP 2210 - Manual (Page 24)

24 Chapter 2 WLAN Handsets overview
NN40050-101 NN40050-101
Phone Options
The Phone Options menu enables you to configure:
• Noise Mode — enables you to adjust the WLAN Handset for different levels of noise within the
working environment.
• Key Tones — determines if tones play when the keys are pressed.
• Warning Tones — determines if warning tones — such as system up, system down or out of
range — are played.
• Display Contrast — controls the amount of contrast for the display for different lighting
conditions.
• Keypad Autolock — controls the automatic locking of the handset key pad when the handset is
in standby mode.
To select the Noise Mode
1 Press when the handset is in the standby state.
2 Press the Up and Down buttons to scroll through the menu and highlight Phone Options .
3 Press the Select button (or OK) to select Phone Options .
4 Press the Up and Down buttons to scroll through the menu and highlight Noise Mode .
5 Press the Select button (or OK) to select Noise Mode .
6 Press the Up and Down buttons to scroll through the menu and highlight one of the following
settings:
• Normal — For most office environments (default).
• High — For moderate background noise.
• Severe — For extremely noisy conditions.
7 Press the Select button (or OK) to select the highlighted setting.
8 Do one of the following:
• Press UP to return to the previous menu and configure another option.
• Press to exit all menus and return to the standby state.
You can also press Exit from the top-level menu to exit the menu and return to the active
(off-hook) state.
To select the Key Tones
1 Press when the handset is in the standby state.
2 Press the Up and Down buttons to scroll through the menu and highlight Phone Options .
3 Press the Select button (or OK) to select Phone Options .
4 Press the Up and Down buttons to scroll through the menu and highlight Key Tones .
5 Press the Select button (or OK) to select Key Tones .