Nokia 2865i - Manual (Page 78)

S e t t i n g s
78
Mode
If supported by your wireless service provider, you can choose whether your
phone will use digital or analog service. Depending on your service provider, some
options may be different or may not appear. Select
Menu > Settings > Network >
Mode and one of the following.
Digital preferred —You prefer to make calls on a digital network, but will find
another network, if necessary.
Analog only —You can make and receive calls on an analog network only.
Analog per call —You can select an analog network on a call to call basis.
IS-95 per call —You can select an IS-95 network on a call to call basis.
Digital only —You can make and receive calls on a digital network only.
■ Network services
The following features are network services. See also "Network services," p. 6.
Store a feature code
Network feature setting allows you to activate network services in your phone
using feature codes received from your service provider.
1. Select Menu > Settings > Network services > Network feature setting .
2. Enter the feature code from your service provider (for example, *900 for
activating Forward if busy ), and select OK .
3. Select Call forwarding .
4. Scroll to the type of forwarding that matches the feature code you entered
(for example, Forward if busy ), select Activate .
The activated feature code is now stored in your phone, and you are returned to
the
Feature code: prompt. Continue entering other feature codes (for example,
*900 to cancel Forward if busy ), or press the end key to return to standby mode.
When you enter a network feature code successfully the feature becomes visible
in the
Network services menu.
Call forwarding
Call forwarding tells your network to redirect incoming calls to another number.
Call forwarding is a network service and may not work the same in all networks,
so contact your wireless provider for availability and information.