NEC 5302 - Manual (Page 9)

5302 IP Phone User Guide
9
Phone Status: Audio/Visual Feedback
The status of the 5302 phone is provided by the LEDs and tones played either through the handset or
speaker.
LED Feedback:.
LED Off On (Solid) Blinking slowly Blinking quickly
Message /
Ringing No voice
messages in
your mailbox,
and no
incoming call. Not Applicable There is an incoming
call. Ringing indication
takes precedence
over voice message
indication. There is a new
message in your
voicemail box.
Line 1 Line 1 is idle. There is an active call
on Line 1 or Line 1
has been seized to
place an outgoing call. There is an incoming
call on Line 1. There is a held call on
Line 1.
Line 2 Line 2 is idle. There is an active call
on Line 2 or Line 2
has been seized to
place an outgoing call. There is an incoming
call on Line 2. There is a held call on
Line 2.
Tone Feedback
Tone Name Is heard when…
Error tone you press a programmable key that has not been configured by your System
Administrator
Busy tone a called party is busy.
Re-Order tone an incorrect number has been dialed..
Ring-back tone a called party is ringing.
Ring tone there is an incoming call
Paging tone a page is received.
TM
, ® Trademark of Mitel Networks Corporation.
© Copyright 2007, Mitel Networks Corporation.
All rights reserved.