NEC XV29 Plus - Manual (Page 10)

Raster Control
7 WIDTH (+ / –)
Adjusts the horizontal size of the image.
8 HEIGHT (+ / –)
Adjusts the vertical size of the image.
9 SIDE PIN (+ / –)
Adjusts the curvature of the edges of the left and right side of the display
image either inward or outward. The image should be adjusted to attain a
straight line on the left and right sides.
10 SCAN SELECT
Each time this key is pressed, the picture size switches from OVER SCAN
for large size to UNDER SCAN for small size and vice versa. Normally
select OVER SCAN for video display and UNDER SCAN for RGB display.
11 NORMAL
This key resets the raster adjustment settings of user changeable memory and
recalls the factory preset data.
Visual Control
12 BRIGHT ( ▲ / ▼ )
Adjusts the overall image and screen brightness.
Press and hold s for a brighter picture.
Press and hold t for a darker picture.
13 CONTRAST ( ▲ / ▼ )
Adjusts the image brightness in relation to the background.
Press and hold ▲ for higher contrast.
Press and hold ▼ for lower contrast.
NOTE: The VISUAL CONTROL storing operation is effective only for one input
(VIDEO1, VIDEO 2, RGB 1 or RGB 2).
14 NORMAL
This key resets the visual control settings and recalls the factory preset data.
NOTE: The brightness and contrast adjustment level are factory preset at the
optimum position.
15 MUTE
Press to cancel sound ; press again to restore sound.
NOTE: The other ways to restore sound are to press POWER OFF, then ON or to
press VOLUME keys on the remote control unit.
16 VOLUME ( ▲ / ▼ )
Adjusts the volume.
Press and hold ▲ to increase sound.
Press and hold ▼ to decrease sound.
79645721
POWER
ON
RGB 2 RGB 1 VIDEO 2 VIDEO 1
POSITION / CONTROL PROCEED
EXIT
SCAN
NORMAL SIDE PIN HEIGHT WIDTH
BRIGHT CONTRAST MUTE
NORMAL
VOLUME
OFF DEGAUSS
MULTIMEDIA MONITOR
RD-346E
10
11
16
15
9
14
12
7
8
13
9
10