Setup option 2, Establish a wireless connection, Np740n – quick install guide – NetComm NP740n 11n User Manual
Page 2

3
Open up your web browser and type into the
address field:
192.168.1.1/wanpppoe.asp
4
Enter the following details
User name:
admin
Password:
admin (lower case)
Then click
OK
5
Enter your
Internet Service Provider (ISP’s) User
Name and Password into the fields as shown below.
The Service Name can be left blank. Click
Apply
with the default settings.
6
The following page will appear. Click
Apply
7
See below for instructions on how to establish a
wireless connection.
Setup option 2
If you are unable to set your Broadband Modem to Bridge
Mode or do not need to network multiple devices, follow
the steps below:
1
Connect your Router – refer to the step 2 on the
previous page
2
Open up your web browser and type into the
address field:
192.168.1.1/lan.asp
3
Enter the following details
User name:
admin
Password:
admin (lower case)
Then click
OK
4
Enter the following numbers into the fields listed
below:
IP Address:
192.168.3.1
Start IP:
192.168.3.2
End IP:
192.168.3.254
5
Click on Apply/Submit or press OK
NP740n – Quick Install Guide
Establish a Wireless Connection
You can connect multiple wireless devices including laptops, desktops and PDA’s to your 11n
Wireless Router by following the 2 basic steps:
1
Using your wireless device, scan the wireless networks in your area and select the network
called
wireless. Then click Connect.
2
Enter the following security key:
a1b2c3d4e5