NextBase SDV685-AC - Manual (Page 43)

ENG 42
MOBILE ENTERTAINMENT
IR HEADPHONE
L
AUDIO SETUP
AUDIO OUT
EXIT SETUP
FM TRANSMITTER
IR HEADPHONE
L
AUDIO SETUP
AUDIO OUT
IR HEADPHONE
FM TRANSMITTER
EXIT SETUP
SPDIF/OFF
SPDIF/RAW
SPDIF/PCM
Highlight the IR HEADPHONE item and use the arrow buttons to choose the following options:
CHANNEL A, CHANNEL B and OFF. Press OK to confirm.
The selected IR option on the DVD player should be conformed to the adjustment of the receiving
IR earphone. Or no sound can be heard.
The default setting is OFF.
A UDIO OUT
Highlight the AUDIO OUT op tion, and press the arrow buttons to choose the audio output mode
you prefer. Press OK to confirm:
There are 3 optional audio output modes: SPDIF/OFF, SPDIF/RAW and SPDIF/PCM.
SPDIF / OFF: Choose this setting to output analog signal, and there will be no digital signal
output from an coaxial output jack.
SPDIF / RAW: Choose this setting if your DVD player is connected to a power amplifier with
a coaxial cable. When playing a disc recorded with Dolby Digital and MPEG audio formats,
the corresponding digital signals will be outputted from the coaxial Output jack.
SPDIF / PCM: Choose this setting if your DVD player is connected to a 2-channel digital
stereo amplifier. When playing a disc recorded with Dolby Digital and MPEG audio formats,
audio signals will be modulated into a 2-channel PCM signal, and it will be outputted from the
coaxial Output jack .
AUDIO SETUP
CH AN NE L A
CH AN NE L B
OF F
Note:
Compatible IR cordless headphones are available from your NEXTBASE distributor.
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn