5) optimizing computer signal automatically, Adjusting the image using auto adjust, 6) turning up or down volume – NEC NP110 User Manual
Page 34: Optimizing computer signal automatically, Turning up or down volume
25
3. Projecting an Image (Basic Operation)
Optimizing Computer Signal Automatically
Adjusting the Image Using Auto Adjust
Optimizing a computer image automatically.
Press the AUTO ADJ. button to optimize a computer image automatically.
This adjustment may be necessary when you connect your computer for the first time.
[Poor picture]
[Normal picture]
NOTE:
Some signals may take time to display or may not be displayed correctly.
• The Auto Adjust function will work for computer (RGB) signal only.
• If the Auto Adjust operation cannot optimize the computer signal, try to adjust [HORIZONTAL], [VERTICAL], [CLOCK], and [PHASE]
manually. (
→ page
Turning Up or Down Volume
Sound level from the speaker can be adjusted.
TIP: When no menus appear, the
and buttons on the projector cabinet work as a volume control.
Increase volume
Decrease volume