NEC EXPRESS800 - Manual (Page 46)

4-8 Installing the System Rack
Installing Rack Frame Link Kits
This section describes how to assemble two or more racks into a multi-bayed
system using the rack frame link kit. Figure 4-5 shows a linked multi-bayed
system.
Figure 4-5. Multi-Bayed Rack System
What You Need
In addition to the Rack Frame Link shown in Figure 4-6, you will need:
! a #2 and #3 Phillips-head screwdriver to assemble the kit
! a six foot step-ladder
Figure 4-6. Rack Frame Link Kit
! WARNING
It is strongly recommended that two people be present when
assembling the rack and installing system components.