NEC PX-42VP4D - Manual (Page 35)

28
ORBITER
Use this to set the picture shift.
Example: Setting “ORBITER” to “AUTO1”
Perform Steps 1-2 of LONG LIFE, then...
3. Use the ▲ and ▼ buttons to select “ORBITER”.
4. Use the ᮤ and ᮣ buttons to select “AUTO1”.
The mode switches as follows each time the ᮤ or ᮣ
button is pressed:
→
OFF
↔
AUTO1
↔
AUTO2
↔
MANUAL
←
LONG LIFE
EXIT
PLE
ORBITER
INVERSE
SCREEN WIPER
: AUTO
: AUTO1
: OFF
: OFF
SEL. RETURN ADJ.
Information
Ⅵ
ORBITER settings
OFF .............. Orbiter mode does not function.
AUTO1 ......... The picture moves around the screen
intermittently, making the picture
smaller.
AUTO2 ......... The picture moves around the screen
intermittently, making the picture
bigger.
MANUAL ...... User can adjust the orbiter function
(Horizontal Dot, Vertical Line and
Time) manually.
See the following explanation.
Information
Ⅵ
PLE settings
AUTO .............. The brightness of the screen is
adjusted automatically to suit the
picture quality.
LOCK1, 2, 3 .... Sets maximum brightness.
The brightness level decreases in the
order of LOCK 1, 2, 3. LOCK 3
provides minimum brightness.
Adjust the ORBITER function manually
Set the amount of shift and the time between movement.
Example: Setting so that the picture moves 2 dots
horizontally and 3 lines vertically every 3 minutes.
Perform Steps 1-3 of ORBITER, then...
4. Use the ᮤ and ᮣ buttons to select “MANUAL”, then
press the MENU/ENTER button.
THE “ORBITER” screen appears.
5. Adjust the items using the ▲▼ ᮤ and ᮣ buttons.
The mode switches as follows each time the ᮤ or ᮣ
button is pressed:
INVERSE
Use this to set the inverse mode or to display a white
screen.
Example: Setting “INVERSE” to “WHITE”
Perform Steps 1-2 of LONG LIFE, then...
3. Use the ▲ and ▼ buttons to select “INVERSE”.
4. Use the ᮤ and ᮣ buttons to select “WHITE”.
The mode switches as follows each time the ᮤ or ᮣ
button is pressed:
→
OFF
↔
ON
↔
WHITE
←
LONG LIFE
EXIT
PLE
ORBITER
INVERSE
SCREEN WIPER
: AUTO
: OFF
: WHITE
: OFF
SEL. RETURN ADJ.
Information
Ⅵ
INVERSE Settings
ON ......... The picture is displayed alternately between
positive image and negative image.
You can set the time by pressing the MENU/
ENTER button while “ON” is set.
OFF ....... Inverse mode does not function.
WHITE ... The entire screen turns white.
You can set the time by pressing the MENU/
ENTER button while “ON” is set.
• H-DOT
→
1 DOT
↔
2 DOT
↔
.....
↔
19 DOT
↔
20 DOT
←
• V-LINE
→
1 LINE
↔
2 LINE
↔
.....
↔
19 LINE
↔
20 LINE
←
• TIME
→ 1 M ↔ 2 M ↔ 3 M ↔ 4 M ↔ 5 M ←
ORBITER
EXIT
H-DOT
V-LINE
TIME
: 2 DOT
: 4 LINE
: 3 M
SEL. RETURN ADJ.
Information
Ⅵ ORBITER Function settings
H-DOT .......... Moves from 1 to 20 dots in the
horizontal direction.
V-LINE .......... Moves from 1 to 20 lines in the vertical
direction.
TIME ............ Interval of 1~5 minutes.