Introduction, Features, Application – NordicTrack N150 User Manual
Page 5: Led indicators
YML14WN
ADSL2+ Wireless N150 Modem Router User Guide
www.netcomm.com.au
5
NetComm Gateway Series - ADSL2+ Wireless N150 Modem Router
Introduction
The NetComm NB14WN ADSL2+ Wireless N150 Modem Router allows you to connect to a broadband Internet service and share the
connection with multiple users. Also including a host of other features that exist to make your experience as seamless as possible, the
NB14WN is an ideal entry level Wireless N ADSL2+ product.
With a built-in Wireless N access point providing speeds of up to 150Mbps, multiple users are able to connect any Internet enabled device
to the NB14WN without wires and access the Internet from a location convenient to them. On top of this, the NB14WN also comes with a
built-in 4 port Ethernet switch, allowing for other devices to access the Internet over a wired connection.
The NB14WN also has a number of handy features that assist in delivering you the best possible user experience. These include a WPS
push button that allows for an easy set-up of your wireless network, a push button to easily turn your wireless signal on and off, advanced
security options to ensure your network remains safe and an easy to navigate web interface if you need to change any settings.
Features
•
Fully featured ADSL2+ modem router
•
Wireless N access point for speeds of up to 150Mbps
•
4 LAN ports for multiple wired connections
•
WPS button for simple set up of your wireless network
•
Advanced wireless security to maintain the integrity of your network
•
Easy to use web based setup and configuration
Application
Wireless N
150Mbps
PDA
Gaming
Console
Computer
Laptop
Switch
Power
Point
Power
Adapter
Once you have connected to an ADSL service, you are able to share the Internet with a wireless or wired connection.
LED Indicators
The front panel LED indicators are shown and explained below
LED
Icon
Description
Power
Lights up when powered ON.
ADSL
Lights up when the router is connected via ADSL.
Internet
Lights up when connected to the Internet.
Wireless
Lights up when specific Wireless connection is established, Blinks on WAN / LAN traffic and Blinks on Temporarily
overridden to LAN mode.
WPS
Lights up when Wi-Fi protected Set Up is being used
Ethernet
Lights up when the corresponding LAN port is being used