NordicTrack C2155 NTL07707.0 - Manual (Page 15)

15
4. Change the incline of the treadmill as desired.
To change the
incline of the
treadmill, press
the Incline in-
crease and de-
crease buttons.
Each time you press the Incline increase or de-
crease button, the incline will change by 0.5%. To
change the incline quickly, press one of the incline
buttons numbered 0 through 12. Note: After you
press the Incline buttons, it may take a moment for
the treadmill to reach the selected incline setting.
5. Select a display mode and monitor your
progress with the display.
As you walk or run on the treadmill, the display can
show the following workout information:
• The speed of the walking belt.
• Your walking or running pace, in minutes per
mile or minutes per kilometer.
• The approximate number of calories you have
burned.
• The elapsed time.
• The distance that you have walked or run.
• The number of laps you have completed.
• The incline setting of the treadmill whenever
the incline setting changes.
• Your heart rate. Note: Your heart rate can be
displayed only while you use the handgrip
pulse sensor.
• The display can also show an animation of a
road.
When the manual mode is selected, the console of-
fers three display modes. The display mode that
you select will determine which workout information
is shown. Press the Display button repeatedly to
select the desired display mode.
Regardless of which display mode you select, the
speed or incline setting will appear in the display for
a few seconds each time you change the setting.
You can change the volume level by pressing the
Volume increase and decrease buttons.
As you exercise, the workout intensity level bar will
indicate the approximate intensity level of your ex-
ercise. For example, if eight of the indicators in the
bar are lit, the bar shows that your intensity level is
ideal for aerobic exercise.
To reset the console, press the Stop button, re-
move the key, and then reinsert the key.
Workout Intensity Level Bar