Napoleon Fireplaces GI3016-N - Manual (Page 8)

8
W415-0171 / D / 01.06.04
Attach the lower glass bracket.
Seat the glass inside the bracket
and using two screws attach the
upper glass bracket, as shown.
Assemble the flashing and mount to the inside of the outer
shell using 4 securing screws (supplied with the louvre
kit).
Remove the backing of the logo supplied and place on the
glass viewing area, as indicated.
LOWER GLASS BRACKET
LOGO
1 1 /
8
"
1 3 /
8
"
SECURING SCREW
LOCATIONS
LOGO PLACEMENT
FLUSH GLASS FRONT KIT, GI-FF
FLASHING SURROUND KITS, GI-900 / GI-909
UPPER LOUVRES
Insert the back edge of the upper louvre into the upper
louvre clips.
LOWER LOUVRES
Secure the lower louvre assembly to the insert, using the 4
screws supplied.
FLUSH LOUVRE KIT, GI-1L
FIGURE 12b
FIGURE 13
FIGURE 14
FIGURE 12a
SIDE VIEW UPPER
LOUVRE
LOUVRE
CLIP