Nokia 6086i User Manual
Page 50
S e t t i n g s
49
Features using WLAN/Wi-Fi, or allowing such features to run in the background
while using other features, increase the demand on battery power and reduce the
battery life.
Tutorial
To see the tutorial at any time, select
Menu
>
Applications
>
Collection
>
Tutorial
.
To exit the tutorial at any time, select
Exit
.
Turn on WLAN/Wi-Fi
Select
Menu
>
Settings
>
Connectivity
>
Wi-Fi
>
Wi-Fi radio
>
On
.
Quick connection
Quick connection allows you to connect to an open network with the best
signal strength.
1. From the standby mode, select
Go to
>
Quick connect
or, from the
Wi-Fi
menu,
select
Quick connect
.
2. If you have not connected to WLAN/Wi-Fi first, a message asks if you want to
turn on WLAN/Wi-Fi first. Select
Yes
.
3. If you are already connected to another network, a message asks if you want
to disconnect from that network. Select
Yes
.
The phone searches for networks and when the network with the best signal strength
is found, a message is displayed, which confirms the network connection. If you
have not saved the network, a message asks if you want to save it. Select
Yes
or
No
if you want to save the network or not. If no available networks can be found,
No quick connect networks available
is displayed.
Available networks
The list of available networks displays all the available networks to which you can
connect.
indicates that a network is connected and
indicates that a
network is saved.
A network may be hidden and can only be found by searching for its service set
identifier (SSID). An SSID is a code attached to all packets on a wireless network
in order to identify each packet as part of that network. All wireless devices
attempting to communicate with each other must share the same SSID.
1. Select
Menu
>
Settings
>
Connectivity
>
Wi-Fi
>
Available networks
.
2. If you have not already connected to WLAN/Wi-Fi, a message asks if you want
to turn on WLAN/Wi-Fi. Select
Yes
.
The phone searches for available networks and, when the networks are found,
they are listed in signal strength order.