Controls – NEC MultiSync LCD1525V User Manual

Page 9

Controls

AccuColor

Control System

Five color presets select the desired color setting. If a setting is adjusted, the name of

the setting will change to Custom.

Color Gain (Red, Green, Blue):

Increases or decreases Red, Green or Blue color

depending upon which is selected. The change in color will appear on screen

and the direction (increase or decrease) will be shown by the color bars.

Tools

Language:

OSM control menus are available in seven languages.

OSM

™

Position:

You can choose where you would like the OSM control image

to appear on your screen. Selecting OSM Location allows you to manually adjust

the position of the OSM control menu left, right, up or down.
OSM Turn Off:

The OSM control menu will stay on as long as it is in use. In

the OSM Turn Off submenu, you can select how long the monitor waits after the

last touch of a button to shut off the OSM control menu. The preset choices are

10, 20, 30, 60 and 120 seconds.

OSM Lock Out:

This control completely locks out access to all OSM control

functions. When attempting to activate OSM controls while in the Lock Out

mode, a screen will appear indicating the OSM controls are locked out. To

activate the OSM Lock Out function, press PROCEED, then and hold down

simultaneously. To de-activate the OSM Lock Out, press PROCEED, then and

hold down simultaneously.

Factory Preset:

Selecting Factory Preset allows you to reset all OSM control

settings back to the factory settings. The RESET button will need to be held down

for several seconds to take effect. Individual settings can be reset by highlighting

the control to be reset and pressing the RESET button.

Resolution Notifier:

This optimal resolution is 1024 x 768. If ON is selected,

a message will appear on the screen after 2 minutes, notifying you that the

resolution is not at 1024 x 768.

Information

Display Mode:

Provides information about the current resolution display and

technical data including the preset timing being used and the horizontal and

vertical frequencies.

78134641.wpc

5/4/99, 5:38 PM