NEC MultiSync LCD1525V - Manual (Page 8)

6
OSM ™ (On-Screen-Manager) Controls
The OSM controls on the front of the monitor function as follows:
Control Main Menu Sub-Menu
EXIT Exits the OSM controls. Exits to the OSM controls
main menu.
CONTROL / Moves the highlighted Moves the highlighted area
area up/down to select up/down to select one of the
one of the controls. controls.
CONTROL / Moves the highlighted Moves the bar left/right
area left/right to to increase or decrease
select control menus. the adjustment.
PROCEED Has no function. Activates Auto Adjust feature.
In Tool and Information Mode,
opens additional window.
RESET: The currently Resets all the controls within Resets the highlighted control.
highlighted control to the highlighted menu.
the factory setting.
NOTE: When RESET is pressed, a warning window will appear
allowing you to cancel the reset function.
Brightness and Contrast
Brightness: Adjusts the overall image and background screen brightness.
Contrast: Adjusts the image brightness in relation to the background.
Auto Adjust: Corrects the image displayed for non-standard video inputs.
Auto Adjust
Automatically adjusts the Position and H. Size and fine settings.
Position
Controls horizontal and vertical image position within the display area of
the LCD.
Auto Adjust:
Automatically sets the horizontal and vertical image
position within the display area of the LCD.
Image Adjust
H.SIZE: Adjusts the horizontal size by increasing or decreasing this setting.
Fine: Improves focus, clarity and image stability by increasing or decreasing
the Fine setting.
Auto Adjust: Automatically adjusts the H. Size or Fine settings.
Controls
78134641.wpc 5/4/99, 5:38 PM 8