Napco Security Technologies GEM-DXRP3 - Manual (Page 31)

31
T R O U B L E S H O O T I N G
What do I do if... For more info...
I try to arm my system but the keypad just displays a P and beeps at me.
If the green STATUS light is off, a zone is open. Refer to the Pull Up Zone Directory and find
and secure the open window or door. See Page 6
I try to arm my system but the keypad displays a P and beeps at me. The SYS TBL light is lit
and numbers start scrolling in the display.
A System Trouble has been detected. Note the scrolling error codes, which represent the
trouble. Press
C and you will now be able arm to the system , but the trouble must be
fixed as soon as possible.
See Page 7 & 27
The Fire Alarm is sounding and I don’t know how to turn it off.
If a fire is in progress, evacuate the premises immediately! If necessary, call the Fire
Department from an outside telephone. If there is no evidence of a fire, enter your code and
press
J
to silence the alarm. Note the number of the Zone flashing in the window. Check
the smoke detector(s). If a smoke detector tripped, its red alarm indicator light will be on.
Press
C to silence the keypad sounder.
See Page 11