National Instruments NI 5412 - Manual (Page 16)

NI 5412 Specifications 16 ni.com
Waveform and Instruction Memory Utilization
Table 9.
Specification Value Comments
Memory Usage The NI 5412 uses the Synchronization and Memory Core
(SMC) technology in which waveforms and instructions
share onboard memory. Parameters, such as number of
segments in sequence list, maximum number of waveforms
in memory, and number of samples available for waveform
storage, are flexible and user defined. —
Onboard
Memory Size 8 MB standard:
8,388,608 bytes 32 MB option:
33,554,432 bytes 256 MB option:
268,435,456 bytes —
Output Modes Arbitrary Waveform mode and Arbitrary Sequence mode —
Arbitrary
Waveform
Mode In Arbitrary Waveform mode, a single waveform is selected
from the set of waveforms stored in onboard memory and
generated. —
Arbitrary
Sequence
Mode In Arbitrary Sequence mode, a sequence directs the NI 5412
to generate a set of waveforms in a specific order. Elements
of the sequence are referred to as segments. Each segment is
associated with a set of instructions. The instructions
identify which waveform is selected from the set of
waveforms in memory, how many loops (iterations) of the
waveform are generated, and at which sample in the
waveform a marker output signal is sent. —
Minimum
Waveform Size
(Samples)
Trigger Mode
Arbitrary
Waveform Mode
Arbitrary
Sequence Mode
The Minimum
Waveform Size
is sample rate
dependent in
Arbitrary
Sequence Mode.
Single 16 16
Continuous 16 96 @ >50 MS/s
32 @
≤50 MS/s
Stepped 32 96 @ >50 MS/s
32 @
≤50 MS/s
Burst 16 512 @ >50 MS/s
256 @
≤50 MS/s