NexxTech super slim divx/mpeg4 dvd player 1617008E - Manual (Page 24)

Notes:
• When your DVD player output is composite
video, these settings have no effect.
• Choose TV-RGB/P-SCAN if your DVD
player is connected to a progressive scan
TV. The default setting is TV-RGB.
* TV TYPE
• 16 : 9 (Wide Screen): Choose this setting
if your DVD player is connected to a
wide screen TV. If you choose this setting
and you don’t have a wide screen TV, the
images on the screen may appear
distorted due to vertical compression.
• 4 : 3 LB (Letter Box): Choose this setting
if your DVD player is connected to a
normal ratio TV connector. You will see the
movies in their original aspect ratio (height-
to-width ratio). You will see the entire frame
of the movie, but it will take up a smaller
portion of the screen vertically. The movie
might appear with black bars at the top and
bottom of the screen.
• 4:3 PS (Pan and Scan): Choose this
setting if your DVD player is connected
to a normal ratio TV. You can fill the movie
to the entire screen of your TV. This might
mean that parts of the picture (the left and
right edges) won’t be seen.
Notes:
• The image display ratio is related to the
recorded disc format. Some disc can
not display images in the aspect ratio you
choose.
• If you play a disc recorded in 4:3 format on
a wide screen TV, black bars will appear
on the left and right side of the screen.
• You must adjust the screen setting
depending on the type of the television you
have.
* SCREEN SAVER
If the screen saver is on, when your DVD
player is in Stop, Open or No Disc state,
or there is a frame frozen for more than 60
sec, the screen saver will be displayed. This
feature can protect the screen from damage.
• ON: Choose this setting to activate the
screen saver.
• OFF: Choose this setting to cancel the
screen saver.
The default setting is ON.
* VIDEO
• Interlace-YUV: Choose this setting if your
DVD player is connected to a TV with Y,
Cb, Cr video cables.
• TV-RGB: Choose this setting if your DVD
player is connected to a TV with an
S-Video cable or composite video cables.
• P-SCAN: Choose this setting if your DVD
player is connected to a progressive scan
TV with Y, Cb, Cr video cables.
• PC-VGA: Choose this setting if your DVD
player is connected to a progressive scan
TV or a monitor with a VGA video cable.
22
SETUP MENU SYSTEM