Nokia 3585 - Manual (Page 28)

Section 2: Understanding Your Phone
22 2A: Your PCS Phone The Basics
1-Touch Dialing
1-touch dialing allows you to speed dial by simply pressing one
designated key and
. To use 1-touch dialing, you must first assign
a number to a particular key:
1. Press Names , scroll to 1-touch dialing , and press Select . Key
numbers 2–9 are displayed.
2. Scroll to the key number you wish to assign and press Assign .
3. Enter the number you wish to assign to this key, and press OK . If
1-touch dialing is not activated, your phone will ask you if you wish
to activate it now. Press
Yes or No .
– or –
4. If the number already exists in your Internal Phone Book, press
Search to find it, and press Select .
To activate 1-touch dialing:
1. Press Menu , scroll to Settings , and press Select .
2. Scroll to Call settings and press Select .
3. Scroll to 1-touch dialing and press Select .
4. Highlight On and press Select .
To make a call using 1-touch dialing:
▲ Press the key assigned to the number you wish to dial, and
press , or press and hold the assigned key for 2 seconds.
Voice Dialing
You can also make calls by voice-activated commands. (See "Voice-
Activated Dialing" on page 74.)
Answering Calls
1. Make sure your phone is On. If your phone is Off, incoming calls go
to voicemail.
2. When a call comes in, answer the call by pressing . Depending
on your settings, your PCS Phone notifies you of incoming calls in
the following ways:
ᮣ
The phone rings and/or vibrates.
ᮣ
The backlight illuminates.
ᮣ
The screen displays an incoming call message.
Sprint FM OUG NO BROWSER CTIA-3a.book Page 22 Wednesday, October 9, 2002 1:42 PM