NetComm NP1500 User Manual
The intel-based adaptor that really means business, Check these great features, Product code: np1500
NETCOMM LIMITED
ABN 85 002 490 486
• 2-6 Orion Road, LANE COVE, NSW, 2066 • phone 02 9424 2070 • fax 02 9424 2010 • email [email protected]
www.netcomm.com.au
10/100 MBPS FAST ETHERNET LAN ADAPTOR
CO R P O R AT E S E R I E S
Product Code: NP1500
N E T WO R K I N G & C OM MU N I C AT I O N S C O N V E R G E D
Renowned Intel reliability
Double your network data rates up to 20/200Mbps
– full duplex mode
32
-bit PCI Bus Master high-speed operation of
Rev.2.1 specification
Wake-on-LAN function (cable included) and remote wake-up
You can depend on Intel
10
/100Mbps auto-sensing single shielded RJ-45 connector
Full duplex mode doubles network data rate to 20/200Mbps
IEEE 802.3x flow control
IP multicast address filter
Low network command processing overhead
Operates within Windows ® 95, 98, ME, NT, 2000 and XP
CHECK THESE GREAT FEATURES
NetComm’s NP1500 is an enhanced performer with
auto-sensing 32-bit 10/100Mbps fast Ethernet technology
for desktop PCs.
Specially developed with business users in mind, this Intel
chipset-based adaptor is equipped with advanced features
that deliver reliability, superior performance and ease of
installation for any workstation or high-speed server.
This card features N-Way auto-negotiation for automatic
selection of the network speed and full duplex mode to
double network data rates up to 20/200Mbps. In fast full-
duplex mode, the adaptor's embedded flow control protects
against possible data loss during transmission.
A comprehensive set of software drivers is included for the
most popular PC Network Operating Systems including
Microsoft Windows ® 95, 98, ME, NT, 2000 and XP.
The Intel-based adaptor that really means business