Nokia 5180i - Manual (Page 39)

32
3 Scroll to Edit, then press OK.
4 Enter your security code (see page 63), then press OK.
5 At Dialing sequence, press Select. Press to choose
the dialing sequence your card uses, then press Select.
Note: The order of the following steps may vary, depending
on which dialing sequence your card uses.
6 Enter the access number (usually the 1-800 number
listed on the back of the calling card), then press OK.
7 Enter your card number and/or PIN, then press OK. Your
phone will display Save changes? Press OK.
8 Press to reach Card name, then press Select. Enter
the card name using your phone’s keypad, then press OK.
Note: This procedure might not work with all calling cards.
Please look at the back of your calling card or contact your
long distance company for more information.
Choosing a calling card to use
Use Menu 4 1 3 to select a calling card to use. You are
required to enter your security code.
Dialing
sequence
Use for cards that
require you to:
Cards using
this sequence
Access no.
+ phone no.
+ card no. Dial 1-800 access number,
then phone number, then card
number (+ PIN if required) MCI, AT&T
True Choice,
Sprint Canada,
Unitel
Access no.
+ card no.
+ phone no. Dial 1-800 access number,
then card number (+ PIN if
required), then phone number networkMCI,
WorldPhone
MCI
Prefix
+ phone no.
+ card no. Dial the prefix (any numbers
that must precede the phone
number) and phone number
you want to dial, then card
number (+ PIN if required) GTE, PacBell,
AT&T, Stentor