4 connect the serimux and terminal to a network, 5 connect the monitor and keyboard, 6 power up the serimux-term-cs-16 – Network Technologies CS-16/8 User Manual

Page 12: Vga monitor, Ps/2 keyboard, Rear view of serimux-term-cs-16 network server, Control terminal, 6 minidin male connector 15hd male video connector

NTI RACK MOUNT CONSOLE TERMINAL WITH CONSOLE SWITCH

1.4 Connect the SERIMUX and TERMINAL to a Network

To control the SERIMUX and TERMINAL through a network connected PC, connect a CAT5 Ethernet network cable to the
connector marked "TERMINAL-10 BASE T". Then connect the other end of the Ethernet cable to a Local Area Network (LAN)
through a 10/100 BaseT switch or hub (see Figure 4).

Figure 4- Connect to a Local Area Network (LAN)

Alternatively, the TERMINAL may be directly connected to a PC using a CAT5 Crossover cable. See page 69 for specifications.

1.5 Connect the Monitor and Keyboard

Connect a VGA monitor and PS/2 keyboard to the connectors marked “MONITOR” and “KEYBOARD”.

Figure 5- Connect User's Monitor and Keyboard

1.6 Power Up The SERIMUX-TERM-CS-16

1. Connect the powercord to a power source and power-ON the SERIMUX using the switch on the rear of the
SERIMUX-TERM-CS-16.

2. Power-ON the connected VGA monitor.

RESET

NTI

NETWORK
TECHNOLOGIES
INCORPORATED

Tel:330-562-7070
Fax:330-562-1999

1275 Danner Dr
Aurora, OH 44202

www.networktechinc.com

MONITOR

KEYBOARD

TERMINAL-
10 BASE T

ISP

PARALLEL

SERIAL

PRINTER

PS/2 Keyboard

VGA

Multi-Scan

Monitor

VGA

Monitor

6 miniDIN

male connector

15HD male

video connector

Rear View of SERIMUX-TERM-CS-16

RJ45

Male

Connector

LAN

Ethernet cable