NEC NDK 900 - Manual (Page 3)

INTERNAL RINGING CALLS
Lage LED flashing red
Lift handset
Converse
VOICE ANNOUNCED INTERNAL CALLS
Ensure MIC LED is lit
Respond handsfree or lift handset
OUTSIDE RINGING CALtS
Large LED flashing green
Press flashing ANS key or Line key
Lift handset
Converse
NOTE : If Ringin g L ine Preference is set i.e.
ANS key is preset (ANS key LED is tumed
ON by ANS), then just lif t handset
to answer outside ringing calls.
CALL PICKUP
Lift handset
Dial Call Pickup code:
Same Tenant 61
(internal or transferred calls only)
Other Tenant (outside calls only)
60
Converse
INTERNAL CALLS
Lift handset OR press SPKR key
Dial extension number
OR
Press Feature Access key or One Touch key
programmed for Direct Station Selection (DSS)
NOTE : When calling a station that is not busy,
dialling 1 a f t er the station number will change
ringing tone to voice or voice to ringing tone.
OUTSIDE CALLS
Lift handset OR press SPKR key
Press CALL key OR an idle outside Line key
Dial telephone number
NOTE: If CALL
key is preset (i.e. CALL key LED
is turned ON by C A L L ) , then just lif t
handset and dial telephone number.
STATION/SYSTEM S PEED DIAL
To dial an outside number from the
Speed Dial Memory:
0 Press
LN R/S PD key and dial Speed Dial
Memory location:
Station Speed Dial 90-99
System Speed Dial 00-89
OR
Press Feature Access key or One Touch key
programmed for Station speed Dial
Lift handset
NOTE: 1000 System Speed Dial locations
000-999 can be assigned if no individual
Station Speed Dial locations are allowed