NetComm NB1300 - Manual (Page 11)

Rev. 2 - YML643 www.netcomm.com.au
NB1300 ADSL Modem Page 11
Step 2: Configuring the NB1300
1. After connecting all the ADSL Router cables, powering on the ADSL Router, and launching
a web browser, such as Internet Explorer or Netscape Navigator, browse to the address
http://192.168.1.1.
2. Enter the correct user name and password to access the Configuration tool. The default user
name and password are as below.
User Name : admin
Password : password
Note: You must click the Submit button on every page that you make changes on and
when you have made all your changes click the Save Setting and Reboot button
from the bottom of the menu.
3. Click on the One Page Setup link under the Basic menu.
You will need to Change your WAN and VC settings as provided by your ISP. The following
lists an example of the most common ISP settings used in Australia. The fields that require
changing from the default settings are highlighted.