Napoleon Fireplaces NZ6000 User Manual

Page 13

W415-0442 / A / 12.13.04

FACE PLATE, UPPER GRILL, KEYSTONE & DOOR INSTALLATION

Remove the

facing template held
in place with the 12
screws shown. Dis-
card the screws and
template.

Mount the keystone

and upper grill to the face-
plate, as shown, using the
4 nuts supplied.

Secure the
faceplate to the

unit, using the 12
screws supplied.

Start all 12 screws,
then tighten evenly.

Remember to record your serial # in the manual for
future quick reference.

Ensure that the pressure switch actuating arm and air

Ensure that the pressure switch actuating arm and air
control rod, protrude through the faceplate when in-

control rod, protrude through the faceplate when in-

control rod, protrude through the faceplate when in-
stalled.

stalled.

Remove the backing and place logo onto the bottom
left corner of the faceplate.

Right Door Handle

(operating)

- Insert the door rod through the

round hole of the latch ensuring

the flat edge of the “D” shaped

hole points towards the

hinges.

- Slide the end of the door
rod through the bushing at
the top of the door as

shown.

- Insert the

handle shaft through the
door and the latch.

-Secure with 2 flat wash-
ers and a nut.

- Feed the handle through
the handle spacer and into
the handle shaft.

Left Door Handle

(fixed)

- Insert the handle shaft
through the door.

- Secure with a lock
washer, 2 flat washers
and a nut.

- Feed the handle through
the handle spacer and

into the handle shaft.

See Note #1

See next

page.

See Note #2

See next

page.