Installing a 5.25-inch peripheral drive – NCR S10XL User Manual
Page 41
Configuring the System Board
Installing Drives
NCR S10XL Hot Plug Server User Guide
2-21
To install a 5.25-inch peripheral drive, follow these
steps:
1.
Secure the drive guides on the sides of the
peripheral drive as shown in Figure 2-12.
2.
Insert the drive into a 5.25-inch drive bay.
3.
Connect the drive cables.
Installing a 5.25-inch
Peripheral Drive
Figure 2-12
Securing the Drive Guides
Figure 2-13
Inserting the Drive into the Drive
Bay