Nikon WP-CP2 - Manual (Page 17)

Insert the Camera
10
3. Insert Desiccant
4. Perform a Final Check
• Is the O-ring cracked or damaged?
• Is the O-ring twisted or out of position?
• Is the O-ring free of hair, dust, sand, and other
foreign objects?
• Is the camera in the
correct orientation?
• Has the camera strap
been removed?
Is the desiccant correctly placed? Are the O-ring seal and watertight
channel free of hair, dust, sand, and
other foreign objects?
To prevent condensation from forming inside the
case, insert the silica gel desiccant between the
bottom of the camera and the case. Slide the
desiccant to the front of the case, where it will
not interfere with proper closing of the case. Im-
proper placement could cause the case to leak.
Replacing the Desiccant
Used desiccant loses its ability to absorb moisture.
We recommend replacing the desiccant each time
the case is used (
19).