Nikon WP-CP2 - Manual (Page 12)

5
Introduction
Check for Leaks Again ( 12)
Take Pictures ( 13–14)
1. Turn the camera on
2. Adjust settings
3. Take pictures
If water enters the case, check the O-ring and
confi rm that the case is properly sealed (
10).
If the cause of the leak can not be determined,
take the case to a Nikon-authorized service rep-
resentative.
Clean the Case ( 15–16)
1. Wash the case in fresh water
2. Wipe dry
3. Remove the camera
4. Soak the case in fresh water
5. Wipe dry
6. Let the case dry in the shade
Maintenance ( 17–19)
• Caring for the O-ring
• Storage