Navigon 5100 - Manual (Page 64)

Working With Routes
Navigation
52 NAVIGON 5100 User’s Guide January 2008
NAVIGON, INC. Revision 2.0
Navigation
After the route is calculated, you can begin navigation or view a simulation of the route.
Calculating and displaying routes
With the NAVIGON 5100, you can preplan routes. Planned routes can be saved for later
use, allowing you to create as many routes as you like.
On the R OUTE P LANNING WINDOW :
1. Load a saved route.
- OR -
2. Enter a starting point and at least one route point.
3. Tap the
Show Route button.
The map opens in Preview mode.
The starting point and the route points are marked by flags. For each stage, the
distance and the estimated trip time is given. This information is also displayed for
the entire route.
4. Tap the Start Navigation button or simply start driving.
Viewing the Route Profile
The calculation of a route is based on route options. Create a route or load a previously
saved route.
On the R OUTE P LANNING WINDOW :
1. Tap the Show Route button.
The map opens in Preview mode and displays the calculated route.
2. Tap Options > Route Profile .
You can view and, if necessary, change any of the displayed options.
Note: Once options are changed, they remain in effect for all subsequent navigation.
You can get information regarding changing individual route profiles by tapping the cor-
responding (Help) button.