Nautique 2008 70141 - Manual (Page 154)

8-8
7. Replace the safety wire.
NOTICE
Replace the safety wire. It is very important. Use a stainless steel
safety wire of at least 0.032" diameter.
Through-Hull Fittings
All fittings that actually pass through the hull on the wetted surface
are caulked in. These are not serviceable and must not be tampered
with.
CORC110
Section 8
Correct Craft, Inc.
Nautique Ski Sec 8.qxd:Nautique Ski Sec 8.qxd 6/18/07 5:18 AM Page 8-8