Nautique 220 - Manual (Page 93)

4-18
Automatic Return to Locked Mode
If no keypad activity takes place for 10 hours after unlocking, the
system will automatically return to the Locked Mode to help
prevent battery drain.
Automatic Back-lighting
Pressing any keypad key will automatically turn the keypad back-
lighting on for 10 seconds. This feature is useful for finding the
keypad at night.
Multiple Keyless Ignition Codes
The keyless ignition system has provisions for three different
ignition codes. Any of the three codes may be used to unlock or
lock the system.
The “Master Embedded Code” is programmed into the system at
Correct Craft Inc. It is not changeable and remains with the boat
for its life. This code can be used to unlock the system, to lock the
system and to erase the two user codes.
The “Primary User Code” is programmed into the system by the
owner with the Correct Craft Dealer’s help at the time of boat
delivery. This code is used to unlock the system, to lock the system
and to add or change the “Secondary User Code.”
The “Secondary User Code” is programmed into the system by the
owner when necessary. This code is only used to unlock or lock the
system. The “Secondary User Code” is ideal to limit access to the
boat.
NOTICE
To help prevent battery drain, make sure you STOP the engine
and LOCK the PME ignition system (two steps) when you are
finished using the boat.
Section 4
Correct Craft, Inc.
Naut Air Sec 4.qxd 8/29/06 4:21 PM Page 18