NISSAN Z12-D User Manual

Page 41

Text mode
Original mode

Black plate (39,1)

Model "Z12-D" EDITED: 2009/ 1/ 28

harnesses.

. Inspect the lower anchors by insert-

ing your fingers into the lower
anchor area and feeling to make
sure there are no obstructions over
the LATCH anchors, such as seat
belt webbing or seat cushion mate-
rial. The child restraint will not be
secured properly if the LATCH an-
chors are obstructed.

Front-facing

Follow these steps to install a front-facing child
restraint using LATCH system:

1. Adjust the rear seat to the upright and

rearmost position.

2. Position the child restraint on the seat.

Always follow the child restraint manufac-
turer’s instructions.

SSS0645

Front-facing (webbing-mounted) — step 3

3. Secure the child restraint anchor attach-

ments to the LATCH lower anchors. Check
to make sure the LATCH attachment is
properly attached to the lower anchors.

SSS0646

Front-facing (rigid-mounted) — step 3

Safety — Seats, seat belts and supplemental restraint system

1-25