beautypg.com

Operation instructions (con’t) – Newcon Optik NIGHT VISION MONOCULAR User Manual

Page 9

background image

USE OF ACCESSORIES

Wrist wrap

• Insert the end of the wrist wrap in the hole located on the back

of the unit.

• Tighten the wrist wrap by passing is through hinge, as it is

shown on the picture in the right.

Mounting the unit on a tripod

• Align tripod screw with tripod thread 1/4"

located on the right hand side of the body of the
unit.

• Tighten the tripod screw.

• Place the tripod on a stable ground and fully

extend the legs of a tripod.

OPERATION INSTRUCTIONS (con’t)

17

LOW BATTERY INDICATOR

Low battery indicator is RED and is located in ocular field of view, the

indicator will start to blink if voltage of the power supply is between 0.9 - 1.0
V, in this case the Green unit ON indicator is off. If the voltage is very low
(less than 0.9V), all indicators of NVD will automatically turn off. Turn OFF the
unit and replace the battery.

INDICATOR HIGH-LIGHT CUT OFF

High-light indicator is blue color and is located in the ocular field of view,

this indicator light will blink if the unit is exposed to bright light source that can
damage the unit. If the unit is exposed continuously for more than 5 - 7s, the
unit will turn OFF and the indicator light will glow continuously. At low light
levels below normal parameters High-Light indicator will turn off, and the unit is
operational again automatically. Should you require to operate the unit in high
light situations cover the objective lens with protective cap.

16

OPERATION INSTRUCTIONS (con’t)