Napco Security Technologies Alert 800 - Manual (Page 4)

l Steady system is armed.
l Flashes system is in alarm.
Count the number of flashes to
tell in which zone the alarm
occurred. Example:
alarm in Zone 4.
l Steady system is disarmed, all
zones okay.
l Flashes zone in trouble
capable of being armed). Count
the number of flashes to deter-
mine zone(s). Example: Four
flashes trouble in Zone 4.
shunt
l Steady one or more zones are
shunted (bypassed) from the
system.
l When you enter your premises,
the tone reminds you to reset
the Control Center before the
end of a timed entry period so
you do not activate the alarm.
The Mini-Sounder also sounds
if you attempt to arm the system
when a particular zone is in
trouble.
Faceplate of Digit-Key keypad
lifts up to reveal convenient ref-
erence index of zones protected.