NISSAN 2009 Cube User Manual
Page 9

TEMPERATURE CONTROL BUTTONS
Ⅲ Press the temperature control buttons
up
to increase the temperature or
down
to decrease the temperature.
Ⅲ The temperature range is between 60°F and 90°F.
MODE BUTTON
Press the MODE button
to cycle through the following air flow outlets:
Air flows from the center and side vents.
Air flows from the center, side, and foot vents.
Air flows mainly from the foot vent.
Air flows from the defroster and foot vents.
Air flows mainly from the defroster vents.
FAN SPEED CONTROL BUTTONS
Ⅲ Press the
(slower) or
(faster) button to adjust the fan speed.
Ⅲ Using the fan speed control buttons will disable the auto mode; to resume auto mode,
press the AUTO button
.
DEFROSTING/DEFOGGING FRONT AND SIDE WINDOWS
Ⅲ Press the defroster control button
to turn the system on. The A/C automatically
turns on when the defroster mode is selected.
Ⅲ Use the temperature control buttons
to set the desired temperature.
Ⅲ To set the defroster on high, press the fan speed control button
to increase the
fan speed to its maximum setting.
DEFROSTING/DEFOGGING REAR WINDOW AND OUTSIDE HEATED MIR-
ROR (if so equipped)
Ⅲ Push the rear window defroster switch
on.
Ⅲ Push the rear window defroster switch
again to manually turn the defroster off.
Ⅲ This function automatically turns off after approximately 15 minutes.
A/C BUTTON
Press the A/C button to manually turn the A/C on or off.
7